Custom Carbon Fiber Props.
This is a close out special for our remaining inventory of blemished/ scratch & dent supply. We have a Newer style coming to market soon so all the old must go. NOTE: these come with a 7 day warranty only. Must submit a warranty with in 7 days from receiving https://glidersports.com/warranty/
125cm – For 2.68 reduction drive on a Vittorazi Moster 185 Plus/Silent/Classic or 2.76 on a Minari Engine.
** Please note: When running a prop with a cooling profile you will need a prop spacer to ensure proper clearance from the reduction drive, please contact us if you have further questions.**
This spacer is recommended for the Vittorazi: Aluminum Spacer
Reduction Drive selection: Almost all Vittorazi engines ship with a standard 2.68 reduction drive. You should have been informed by your dealer if you purchased a 2.87 reduction, also note, some PAP paramotors ship with a 2.87 reduction drive as standard. Please contact us if you have questions.
These propellers have been designed and optimized to deliver maximum power and fuel efficiency, while maintaining proper engine temps. They are based on a foam core design and are much stronger than standard carbon propellers currently in the PPG market.
The design theory was simple, to develop a prop that provides linear thrust throughout the full RPM range that doesn’t compromise spool up speed and maximum thrust. To often props are designed to deliver maximum thrust at full RPM, but yield poor results in the lower/mid RPM range.
Our testing was verified doing back to back climb test with several GPS’s and Vario’s to measure performance, after many prototypes, we feel we finally have it right. In our opinion, this is the most accurate way to design a prop as doing static thrust test does not always yield the best profile and often does a poor job replicating actual flying conditions…
We currently only have them available for the Minari, Moster, Moster Plus/Silent & Thor 190 engines. Please feel free to contact us if you have any questions.
**Dealer orders welcome, please contact us for pricing…